1. Causes of rice mill blockage
1. Too many impurities: Some farmers do not screen the impurities in the rice when using the rice mill. Impurities will be carried during the milling process. The impurities accumulate on the screen of the rice mill, causing the rice mill to be unsmooth.
2. The rice mill has been used for too long: The internal friction of the machine increases after long-term use, and it is easy to get stuck or wear seriously.
3. Improper maintenance of the rice mill: The rice mill should be maintained after long-term use to prevent aging and wear of parts and keep the machine running normally.
2. Treatment methods for rice mill blockage
1. Check the impurities in the rice mill: Before using the rice mill, the rice should be screened to remove impurities. If the machine has been blocked, the screen needs to be cleaned.
2. Maintain the rice mill: After using the rice mill for a long time, the machine should be maintained. You can clean and replace wearing parts to ensure the normal operation of the machine.
3. Use suitable rice: Choosing suitable rice can avoid machine blockage. Choosing rice with large grains, dryness and no impurities can better ensure the operation of the rice mill.
4. Timely handling of faults: When the machine fails, it should be handled in time. You can contact professional technicians for repair or replacement of parts.
5. Increase the exhaust vents: When using the rice mill, you can increase the exhaust vents appropriately. This can increase the ventilation inside the machine and avoid blockage during long-term operation of the rice mill.
In short, there are many reasons for the blockage of the rice mill, but this can be avoided through reasonable use and maintenance. When using the rice mill, you should pay attention to screening, maintenance and troubleshooting to ensure the normal operation of the machine.
