Structural Diagram Of Small Rice Milling Machinery

May 14, 2024 Leave a message

Small rice milling machinery is mainly composed of five parts: feeding device, whitening chamber, discharging device, transmission device and air injection system.

1. Feeding device: responsible for stably feeding brown rice into the whitening chamber. Its design needs to consider the flow and uniformity of brown rice to ensure the continuity and stability of the rice milling process.

2. Whitening chamber: It is the core component of the rice milling machinery, and is equipped with key structures such as sand rollers and rice screens. The sharp sand blades on the surface of the sand roller are responsible for grinding the cortex of brown rice, while the rice screen plays the role of screening and auxiliary friction. In the whitening chamber, the interaction between brown rice and the sand roller and rice screen is the key to achieving brown rice peeling and whitening.

3. Discharging device: discharges the whitened rice grains and bran powder from the rice milling machinery, usually designed as an adjustable discharge port to meet the needs of different grinding degrees.

4. Transmission device: powered by a motor or diesel engine to drive the sand roller in the whitening chamber to rotate and achieve the grinding action. The design of the transmission device needs to consider the efficiency and stability of power transmission.

5. Air spray system: Through the action of air spray, the bran powder produced during the rice milling process is separated from the rice grains and discharged outside the machine to ensure the cleanliness of the rice grains.