Characteristics of the new cylindrical cleaning screen
Yutai Jinyuan Machinery Co., Ltd. has recently developed a new type of cylindrical cleaning screen with first-class process solutions and after-sales technical support

1. The net output of screen drying and cleaning is strong, non blocking, and efficient in screening.

2. The material composition under the screen ratio is flexible, and the screen size can be adjusted to achieve the desired ratio.

3. Screening ability, with a wide range of screening options. Easy to operate, adjust, and maintain.

4. Closed, with minimal pollution and a good environment. No vibration, noise, long service life.

The material is fed into one end of the cylinder, fine grade material passes through the sieve holes on the working surface of the cylinder, and coarse-grained material is discharged from the other end of the cylinder. The rotational speed of the cylindrical screen is very low, the operation is stable, and the power balance is good.
Wear and tear is a fundamental type of component failure, typically referring to a decrease in the geometric dimensions (volume) of the component. Wear can be divided into abrasive wear, adhesive wear, fatigue wear, erosion wear, corrosion wear, and micro motion wear.
(1) Before the renovation, the service life of the cylindrical screen was 3 months, and each replacement required a shutdown of 7 hours. The 3 ball mills affected the processing capacity of about 20000 tons/year of ore. After the renovation, the cylindrical screen was used for 18 months without any downtime due to screen malfunctions, and there was no significant wear on the cylindrical screen frame. The wear on the screen mesh was relatively small, and it is estimated that the screen mesh in the most severely worn area can still be used for 12 months. Each replacement of the worn screen takes about 3 hours, reducing the downtime of the ball mill.
(2) After the transformation of the cylindrical screen, the 3 ball mill can save more than 50000 yuan in maintenance costs annually.
(3) After transforming the cylindrical screen into a rubber lined steel frame and rubber screen mesh, the noise in the discharge section of the ball mill was reduced, improving the operating environment for employees.
