Horizontal rice polishing machine: correct operation and daily maintenance

Sep 03, 2025 Leave a message


The horizontal rice polishing machine is a key equipment in modern rice grinding, responsible for improving the brightness, quality, and market value of the final product. Proper operation and continuous maintenance are crucial for maximizing efficiency, ensuring long lifespan, and ensuring the highest quality of polished rice. This guide describes the key steps of both.

 

Correct operating procedures


1. Pre operation inspection: Before starting, conduct a thorough inspection. Ensure that all parts are securely fixed and there are no loose bolts. Check whether there is obvious wear on the grinding roller or polishing belt. Confirm that the interior of the machine is clean and there are no grains or foreign residue.


2. Ignition sequence: First, start auxiliary equipment such as dust collectors or blowers to establish appropriate suction. Then, start the polishing machine itself. Let the machine idle for a few minutes to reach a stable operating speed, and check for any abnormal vibrations or noise.

 

3. Feeding rice: Start gradually and evenly feeding brown rice on the machine. Sudden influx may cause engine blockage and overload. The feed rate must be consistent with the design capacity of the machine.


4. Polishing pressure adjustment: Most horizontal polishing machines have a polishing pressure adjustment mechanism (usually through a counterweight or spring system). Adjust this pressure based on the desired goals and the type of rice being processed. Higher pressure will produce whiter rice, but may increase cracking. Find the best balance for your target quality.


5. Process monitoring: Continuously monitor the sound of the machine and the appearance of the unloaded rice. Any sharp change in noise level may indicate a problem. Rice exports must be checked for consistency between polishing and temperature.

 

6. Shutdown sequence: To shut down correctly, first stop feeding the brown rice. Let the machine run until all the rice inside is unloaded. Then turn off the main polishing machine. Finally, turn off the auxiliary dust removal system.

 

Necessary daily maintenance


1. Thoroughly clean: After daily operation, thoroughly clean the machine. Remove any remaining rice bran, dust, and polishing agents from the interior, screen, and all surfaces. This avoids pollution and ensures the hygiene of the next batch.

 

2. Inspection of grinding rollers/belts: It is crucial to check the polishing components (rollers or belts) daily. Check for signs of uneven wear or blockage. Clean with a hard brush if necessary to maintain its grinding efficiency.

 

3. Lubrication: Follow the lubrication schedule in the manufacturer's manual. Bearings and other moving parts typically require regular lubrication. Use recommended lubricants to prevent premature wear and ensure smooth operation.

 

4. Check for worn parts: Check for damage to other easily worn parts, such as the sieve and rubber drum (if applicable). When they show obvious signs of wear, replace them quickly to maintain polishing quality.

 

5. Tight connection: Vibration during operation may loosen bolts and nuts. Check and tighten all critical connections as a routine to maintain the integrity of the machine.

 

Horizontal Rice Polishing Machine Rice Rubber Polisher


By following these operation and maintenance guidelines, you can significantly improve the performance and lifespan of your horizontal rice mill, ensuring that it remains a reliable asset for your milling operations.