In the process of grain processing and daily rice milling by farmers, it is very common for Rice Polisher to produce rice with too many broken grains, which not only affects the appearance of the rice, but also reduces its edible value and economic benefits. Many users are helpless in the face of this problem. Today, we have compiled a targeted solution to help everyone effectively reduce the phenomenon of rice crushing.
Improper equipment debugging is one of the main reasons for rice crushing. The adjustment of the clearance between the polishing chambers of Rice Polisher is crucial. If the clearance is too small, the rice grains will be subjected to excessive compression and friction, directly causing breakage; If the gap is too large, the ideal whitening effect cannot be achieved, and the collision of rice grains indoors intensifies, making them also prone to breakage. In addition, an unreasonable drum speed can also affect the quality of rice milling. If the speed is too fast, it will generate excessive centrifugal force, causing the rice grains to collide violently with the inner wall of the equipment. If the speed is too slow, the milling time needs to be extended, increasing the probability of rice grain damage. Users should gradually adjust to the appropriate parameters according to the equipment manual and rice variety, and regularly check whether the equipment has loose parts, drum wear, etc., and repair and replace them in a timely manner.
The standardization of operation is directly related to the effectiveness of rice milling. Many users lack control when feeding into Rice Polisher, resulting in excessive input of raw materials at once, which leads to excessive load in the whitening chamber and uneven force on the rice grains, causing them to be crushed and collide with each other. The correct operating method should be to feed the rice uniformly and evenly, keeping a reasonable distance between the grains during the grinding process. At the same time, impurities such as stones and metal shavings in the raw materials need to be cleaned before rice milling. These impurities can cause impact on the rice grains during milling and may also damage equipment components, indirectly increasing the rice breakage rate. In addition, the rice after milling should avoid rapid cooling or vigorous flipping, and should be naturally cooled in a ventilated and dry place to reduce the cracking of rice grains caused by temperature changes.
The state of the raw materials themselves can also affect the rice crushing rate of Rice Polisher. Excessively damp rice or rice is prone to sticking during grinding, increasing the difficulty of grinding and the risk of breakage, while excessively dry raw materials are more brittle and prone to breakage under external forces. Users need to air dry the raw materials to a suitable humidity and keep them ventilated and dry during storage to prevent moisture or excessive dehydration. There are differences in hardness and particle size among different varieties of rice. When grinding, equipment parameters should be adjusted accordingly to avoid generalization.
In short, solving the problem of rice milling and crushing in Rice Polisher requires comprehensive control from three aspects: equipment, operation, and raw materials. Daily maintenance of equipment, standardized operating procedures, and flexible adjustments based on raw material conditions can effectively improve the quality of rice milling and reduce the generation of crushed grains.
