New Machinery for Rice Milling Machines

Jun 17, 2024 Leave a message

With the gradual improvement of living standards, people have put forward higher requirements for the quality of rice, which has led to rapid improvement of rice milling technology. With the continuous improvement of rice varieties, the output of slender rice grains has been increasing in recent years. This kind of rice will produce a lot of cracking due to its own reasons during the harvesting and threshing process. Traditional rice milling machines will increase the broken rice rate due to backward technology. The unreasonable arrangement of components and backward technology of traditional rice milling machines have led to insufficient air volume and low air pressure passing through the rice milling chamber. The grains settle at the bottom of the rice milling chamber under the action of their own weight, with poor fluidity, and the existing rice milling movement area cannot be fully utilized. If the processing quality of rice is to be improved, one or two rice milling machines are needed to increase the pressure inside the rice milling chamber, but this will cause the rice temperature to rise. In addition, the high cracking rate of the original rice will produce a lot of broken rice during the rice milling process. Therefore, in order to reduce the broken rice rate and improve the quality of rice, a multi-machine light milling process must be adopted.
The multi-machine light milling process is to increase the number of rice mills to increase the moving area of ​​rice milling per unit output. However, reducing the internal pressure of each rice mill and controlling the temperature of rice grains during milling to reduce the broken rice rate and improve the processing quality will cause a sharp increase in costs. In order to reduce costs and improve the processing quality of rice, a new type of rice milling machine has been developed. This model reduces the broken rice rate to a great extent by increasing the utilization rate of the moving area of ​​rice milling per unit output and the air volume penetrating the rice milling chamber. The rice milling process of brown rice uses friction and grinding to peel off the rice bran layer. Friction rice milling requires the polishing chamber to have high pressure and a certain polishing speed, so friction rice milling is also called pressure rice milling. Grinding rice milling does not require high polishing chamber pressure, but requires high linear speed and rice milling rollers with many micro blades, so grinding rice milling is also called speed rice milling. In fact, in any rice milling machine, these two rice milling methods exist at the same time, but due to the different structures and parameters of rice mills, any rice milling machine has a dominant rice milling method. Therefore, rice mills can be divided into friction type rice mills (iron roller rice mills) and grinding type rice mills (sand roller rice mills).